Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is an innovative anti-theft system that utilizes advanced technology to prevent car theft. The device is hidden by thieves, and it only starts the engine when a pin or app is entered.
It's weatherproof and connects to the CAN data network of your vehicle. It also has a service/valet mode, which allows you to start your car temporarily when it's in the garage for cleaning or servicing.
Easy to install
The Ghost immobiliser is a cutting-edge security tool that protects your vehicle from hacking, cloning, and key theft. It uses an PIN code system that is integrated into your vehicle's electronic control unit, making it hard for thieves to recognize. In contrast to traditional immobilisers, it does not require any special keys or sensors and is completely hidden from view without any LED indicators or signals to give away its presence. It is also less expensive than replacing an ECU or installing the new key fob. Additionally, it can reduce the cost of your monthly insurance.
When installing a Ghost 2 immobiliser, be sure to follow the manufacturer's instructions carefully. This will ensure the device functions properly and efficiently. Test the system after installation by entering the PIN number and then starting the car. Regular testing will allow you to identify any issues before they get worse.
Before starting the installation, make sure you check the exact location of the CAN H and L wires. They are essential for powering the immobiliser, therefore it is vital that they are connected properly. It is also an excellent idea to label the wires so that it makes it easier to identify them when installing the device. Once you have identified the location of these wires, connect them to a constant 12V power source as well as the grounding point. Be sure to use a fuse tap if necessary to protect the connections from damage or short circuits.
After connecting the wires, neaten up the wiring with cable ties to avoid alteration. It is also a good idea to cover the connections with insulation tape or heat shrink tubing. This will help protect them from electrical shorts and increase the lifespan of the device. Once the wiring is secured it's a good idea test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode for situations where you might need to give your vehicle away for example, when it is being repaired or parked by a valet. This will disable the PIN sequence for a short period of time. To activate this feature, simply press the brake pedal while holding the accelerator, a number of times equal to the first digit of the emergency code. The system will then enter service mode. This is confirmed by flashing 5 times the indicator signal.
Easy to change PIN codes
A ghost 2 immobiliser is a great way to protect your vehicle from theft. It is hidden within the vehicle and can only be accessed by a unique code. The device is directly connected to the vehicle ECU through its data bus. It does not use radio frequency signals like traditional Thatcham immobilisers or other aftermarket alarm systems. This makes it difficult for thieves to listen for the sound of an immobiliser relay or to install new key fobs. The control unit is concealed within the vehicle's wiring harness or dashboard, and cannot be physically tampered with to reset the system.
The ghost 2 immobiliser is connected to your vehicles CAN Data network and utilizes the buttons already present on the steering wheel, door panels and the central console to generate an individual sequence of up to 20 button presses which must be entered prior to the engine starts - just like a PIN code. This unique system can be reprogrammed and does not require cutting wires when installing. You can even start your car in Valet or Service mode after you hand the vehicle to a mechanic who will do work.
You can also make use of the app to change your PIN code, or deactivate it completely if lost your keys. ghost immobiliser tracker is especially helpful if you have given your car to someone else to be used as a valet or service since it prevents them from starting your vehicle and taking away without your permission. It is also undetectable by professional thieves since it doesn't utilize circuit cuts or radio frequencies.
Another excellent feature of the ghost 2 immobiliser is its capability to stop relay thefts. Relay theft is one of the most frequent methods of car theft. Criminals can hack the diagnostic ports of your car, then alter the signal sent by the car's ECU to trick it into believing that the car's key is valid and present. This is the way traditional immobilisers are bypassed, however, with the ghost 2 immobiliser the signal is blocked before it can reach the ECU.
Easy to use app
Ghost 2 is a revolutionary immobiliser that protects your car from key-cloning, hacking, and key theft. It connects to the CAN data network of your vehicle and requires a PIN code in order to start the engine. It also prevents thieves using signal spoofing and device spoofing that are popular tactics to steal vehicles.
The system is easy to use and works just like a standard car alarm. Installing the system will allow you to create a unique 20-digit PIN code that must be entered prior to starting the vehicle. This will prevent the vehicle from being stolen even if you lose your keys. If you want to deactivate the system, you can do so by using an app on your smartphone.
In contrast to other systems that are silent, the ghost is quiet and doesn't emit any radio frequency signals. It is a weatherproof, discreet device that can be positioned anywhere in your vehicle. It can be concealed under the dash, the steering wheel, or even the door panels. It communicates via the CAN data loop with your ECU and is not affected at all by diagnostic tools used by thieves to locate security systems. It is not affected by jamming devices that can spoof codes.
It is a hidden system that can be used to prevent theft on all vehicles. The technology has been proven effective, and it complies with TASSA Standards. The Ghost is a great option for classic or sports cars. It can also be used as a way to protect vehicles being rental on apps such as Turo.
The Autowatch Ghost 2 is the next generation in vehicle immobilisers. This system is undetectable to thieves and prevents them from starting your vehicle until they have your PIN or are authorised by the app. It also does not emit any radio frequencies or other signals that could be detected by scanners. The installation process is simple and quick. The app has an easy-to-use interface and simple navigation. It also includes an GPS tracker that can help police locate and recover the vehicle.
Easy to reset
It is possible to secure your vehicle from theft using an immobiliser ghost 2. It connects to your vehicle's ECU to create a barrier that thieves can't breach without the correct PIN. The device is also TASSA-verified, which means that it is acknowledged by insurance companies. It's a great device to stop car theft and will save you money in the end.
In contrast to traditional alarms and immobilisers that require circuit cutting for circuit cutting, the Ghost system is connected directly to the vehicle's CAN network. It works by with the existing buttons on the dashboard as well as the steering wheel. You can create a unique pin that can be up to 20 presses long. This PIN has to be entered before the engine can start, just as with the credit card PIN. The Ghost system is inaccessible to thieves, and there are no LEDs to indicate its presence. This makes it the most effective aftermarket CAN-bus immobiliser available today.
Another advantage of the Ghost system is that it does not utilize radio frequency signals, which means it isn't detected or scanned by thieves. This helps to prevent relay attacks and keys that are cloned as well as the more common method of hacking a car's CAN bus system by scanning for signals from its alarm or immobiliser. Additionally to that, the Ghost system is designed to be completely hidden inside your vehicle and there are no LEDs or other signals that signalize its presence.
The system also has an option for a Transport Mode that disables the Ghost system, which is useful for situations in which you have to temporarily disable it, such as during transportation or servicing. This mode is less effective than Service Mode as it doesn't disable the Ghost system when you exceed 31 mph within 15 minutes.
You'll need the emergency code from your installer to reset your Ghost 2 immobiliser. It is usually hidden under a scratch-off section on the card supplied with your installation. This emergency code should be kept safe and kept in a safe place like your wallet at home.